Saxun Bioclimatic Pergola P-150, Руководство по сборке

Страница: 3 / 30

INDEX
01 INSTALLATION
02
We do not provide the screws for fixing-anchoring to the wall and/or foundations. The fitter must choose the adequate
rod / screw / plug / nut / washer system for fixing and flushing to the foundations ad/or wall, based on the nature of
these surfaces. In any case, the screws must be in stainless steel.
1.1 INSTALLING THE SURFACE BRACKET 02
1.2 ASSEMBLING THE OPENING BEAM WITH THE A and B COLUMNS AND
THE CLOSING BEAM WITH THE C and D COLUMNS 05
1.3 ASSEMBLING THE LEFT BEAM WITH A and C COLUMNS 07
1.4 ASSEMBLING THE CENTRAL BEAM 08
1.5 ASSEMBLING THE RIGHT BEAM WITH B and D COLUMNS 09
1.6 JOINING THE SURFACE MANIFOLDS IN THE OPENING AND CLOSING BEAM 10
1.7 INSTALLING THE RUBBER 12
1.8 INSTALLING “U” DRAINING PROFILE, OPENING, CLOSING, CENTRAL
AND LATERALS 13
1.9 INSTALLING THE SLAT, TRANSMISSION PLATE AND MOTOR TANDEM AXLE 14
1.10 MOTOR INSTALLATION 18
02 ELECTRICAL CONNECTIONS
17
The connection of the electrical installation must be done adhering to the current regulations for low voltage
2.1 ELECTRICAL DIAGRAM OF COMPONENTS 18
03 INSTALLING THE COLUMN CAP
18
04 SWITCHBOARD PROGRAMMING (factory set up)
19
4.1 ADVANCED MOTOR PROGRAMMING (factory set up) 19
4.2 LED LINE PROGRAMMING (factory set up) 21
4.3 TOTAL MEMORY DELETION 21
4.4 CENTRAL PROGRAMMING OF 1 MOTOR WITHOUT LED OR SENSORS 22
05 MAINTENANCE
22
Before assembling, please read the maximum tightening torque for each type of screw, as indicated in this section.
— ANNEX A -
REMOVING SLATS
25
— ANNEX B -
DISPOSAL OF PACKAGING AND PRODUCT AT END OF USEFUL LIFE
26
— PERGOLA ASSEMBLING CHECKLIST
27