Thank you for purchasing this accessory. Please read the instructions carefully before use to ensure safe and satisfactory
operation of this product. Please retain these instructions for future reference.
This surface mount kit is designed only for use with
Sirio fittings - 71708, 71710,73986. Please refer to the
installation instructions supplied with the fitting for wiring
and connection details.
• Check you have all parts below:
- 4 x plastic plugs
- 4 x fixing screws
- 16 x small screws
- 4 x fixing brackets
- 4 x frames
• Referring to Fig. 1, assemble three of the frames
together using the supplied brackets and small screws.
Ensure that the two frames with fixing holes are fixed
opposite each other and one frame without fixing holes
adjacent.
• Using the part-assembled frame as a template, mark
and drill the fixing holes. Take care not to damage any
concealed wiring or pipes.
• Fix the part-assembled frame to the ceiling using the
supplied fixing screws and plugs.
• Referring to Fig. 2, Connect the driver as per the
instruction manual supplied with the Sirio panels and
carefully slide the panel into the 3-sided frame. Fix the
fourth frame, without fixing holes in place with supplied
brackets and small screws.
• Replace fuse or circuit breaker and switch on. Your light
is now ready for use.
Installation
For your safety, always switch off the supply before cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Iss.1 13042017
Fig.1
Fig. 2
www.saxbylighting.com
Saxby Lighting. BH23 3PE
