www.saxbylighting.com
Instruction manual
13760
Perle Shaver Mirror
V3 01/04/2022
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
UK Manufacturer: BH17 7BY
For further information, please visit
https://www.lighting-info.co.uk/31471
Technical Data
Bulb
Type:
6.8W LED module (SMD), 6500K This product contains a light source of energy efficiency class
G
.
Conformity with all relevant EC Directive requirements.
Conformity with all relevant UKCA Directive requirements.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is not suitable for dimming.
This product is Class 1, must be connected to earth.
Replaceable control gear by a
professional
Replaceable (LED only) light
source by a professional
Shaver Socket Instructions
• The shaver socket is powered by a 20W isolating transformer and is only intensified for use with electric shavers, electric
toothbrush chargers and similar products.
• Any appliance connected to the socket must not exceed the 20W power output as this could cause damage and
overheating to occur.
• Always check your appliance instructions to ensure the power requirements are less than 20W.
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
Mirror-Use a damp cloth or a propriety glass cleaner. Do not use abrasive materials as these will damage the finish.
Live Voltages may be present in this unit even when turned of or when completely disconnected.
For your safety,
always switch off the power supply before changing lightbulbs, or cleaning.
Care and Safety
The mirror must be replaced immediately should it become cracked or damaged. This fitting must
not be used without the mirror in place.
Replace Cracked Mirror
220-240 V~, 50 Hz
Supply
Voltage:
Shaver
Socket:
115V - 240V dual socket
This product is rated at IP44.
IP
44
