Reflex Mirror Light
13937
Страница 1: ...Reflex Mirror Light 13937 ...
Страница 2: ...electrician Install in accordance with IEE Wiring regulations and current Building Regulations To prevent electrocution switch off at mains supply before installing or maintaining this fitting Ensure other persons cannot restore the electrical supply without your knowledge This light fitting should be connected to a fused circuit If replacing an existing fitting make a careful note of the connecti...
Страница 3: ... product Take care to avoid damaging any concealed wiring and pipes The correct fixings should be used for brick cavity walls or plasterboard 5 Fix into position Take care not to trap the supply wire Commissioning Installation Wall mount this way up only Switch Drain hole must be at the bottom Rectangle Mirror 6 Unpack the shelf supports and glass shelf and set aside Locate the fixing holes for th...
Страница 4: ...must be replaced immediately should the glass shield become cracked or dam aged This fitting must not be used without the glass shield in place Replace Cracked Shade Fitting Replacing Bulbs We recommend cleaning with a soft dry cloth Do not use solvents or abrasive cleaners as these could damage the finish Mirror parts Wash in warm water or just use a damp cloth Do not use abrasive materials as th...