Installation
Layout
•
This LED lighting kit is designed for indoor and outdoor installation for use in patios, in walls, on decking, step
edges, in pathways and in other areas of the garden.
•
This system operates at Safety Extra Low Voltage (12V), via the plug-in transformer. Never connect the light
fittings directly to the mains without using this transformer.
•
Always unplug the transformer from the mains when installing or maintaining this system.
1.
Position the plug next to the indoor mains outlet socket that the system will connect to. Do not plug-in at this
stage.
2.
After deciding the layout of the light fittings, and the position of the junction box, ensure the cables are long
enough to connect to the desired positions.
3.
Drill the mounting holes for the light units taking care not to damage any pipes or mains cables beneath the
mounting surface. For 30mm diameter LED lights drill a 22mm clearance hole. For 45mm diameter LED lights
drill a 32mm clearance hole. Minimum hole depth is 30mm.
4.
Feed the plug and cable of each light unit through the mounting holes and push unit into the hole to secure.
5.
Connect each LED light to the junction box ensuring each plug is fully screwed into the junction box sockets.
6.
Ensure that all the LED heads are connected to the IP67 junction box.
7.
Connect the transformer cable into the end socket on the junction box
8.
Plug the transformer into the mains socket and switch on.
30mm diameter LED
22mm diameter
mounting hole
(minimum 30mm depth)
45mm diameter LED
32mm diameter
mounting hole
(minimum 30mm depth)
Safety Information
•
Plan the desired layout of these fittings carefully, ensuring the cables will reach the distances between the
indoor transformer, the outdoor junction box and each light fitting.
•
Avoid locating any cables in positions that would cause a trip hazard. Position cables and junction box away
from areas where they may be at risk from being cut, trapped or damaged.
•
The mains plug must be situated indoors. The kit can be wired into a IP67 external terminal block. This must be
carried out by a competent and qualified electrician.
•
The transformer is rated at IP67 and can be positioned outdoors.
•
The junction box is rated at IP67 and can be positioned outdoors.
•
The light units are rated at IP67.
