SAWTOOTH ST-DCP-88, Руководство по эксплуатации

Страница: 12 / 29

2. Selecting split point. Pressing the [FUNCTION MENU] button, it enters the function
of keyboard split point, the LCD displays 25 Split point, select required keyboard
split point by pr/- buttons, this point will be the new keyboard split point.
3. Press [SOUND CONSOLE] button, select the volume of upper layer voice in left
hand, the LCD displays VOICELV, you can adjust the volume of the left hand voice
of the keyboard.
Instructions
Enter the function of keyboard split point and LCD does not display the current value of
keyboard split point temporarily. It display the default value is 025. The key at keyboard
split point belongs to left hand chord area.
■
Touch
The touch response function, you can control the dynamic variation of volume with how
hard you press the keys..
Press [TOUCH] button to switch touch function of the keyboard. there are three touch
types for choice altogether.
1. Press [TOUCH] button to open touch response and LCD displays the symbol
2. Press [TOUCH] button ,do the loop operation in this four status: 001/002/003/OFF.
Instructions
When you start the electric grand piano, the touch keyboard will be set automatically and
the default touch level is 2.
■
Reverb
Press [REVERB] button to open preset reverb effect and LCD displays the symbol .
REVERB Press [REVERB] button once again, the reverb symbol will fade from LCD and
close reverb function.