Sawn Craft Micro Eurofighter Manual
Page 8
140904 Micro Eurofighter Manual.docx
5)
Place the elevator and main wing together with trailing and leading edges touching, oriented such
that the hinge bevel faces down when the KFm Step is facing up. Use three small pieces of tape to
attach the smooth sides of the elevator and main wing together. Flip the assemblies over and
install three additional pieces of tape on the bevel side of the hinge to complete the tape hinge.
Elevon Setup
1)
Lay the elevons on the table with the leading edge facing yourself and the wide part of the elevons
on the outside. Use a straight edge ruler and a hobby knife or a sanding block to cut an
approximate 45° bevel into the leading edge of the control surface, ensuring that you have both a
left and right elevon. Dry fit a micro control horn into the slots, ensuring that the hinge bevel is
facing down.
2)
Place the elevon and main wing together with trailing and leading edges touching, oriented such
that the hinge bevel faces down when the KFm Step is facing up. Use two small pieces of tape to
attach the smooth sides of the elevon and main wing together. Flip the assembly over and install
two additional pieces of tape on the bevel side of the hinge to complete the tape hinge.
