IMPORTANT – READ CAREFULLY:
This Process License Agreement (“PLA”) is a legal agreement between you and
Sawgrass Systems, Inc. (“Sawgrass”). By installing the SubliJet
ink in your printer, or
otherwise using the Sawgrass SubliJet
ink, you agree to be bound by the terms of this
PLA. If you do not agree to the terms of this PLA, Sawgrass is unwilling to license the
process of using the SubliJet
ink to you. In such event, you may not use the SubliJet
ink, and you should promptly contact your supplier for instructions on return of the
unopened package.
The process of using the SubliJet
ink is protected by U.S. and foreign patents. Sawgrass will
provide a complete list of the relevant patents upon request. The use of the SubliJet
ink to
practice the patented process is permitted by this license.
1. GRANT OF LICENSE This PLA grants you the following rights: You may install and use the
SubliJet
ink packaged herewith in your Epson printer to practice the printing process
described in U.S. Patent No. 5,488,907. The use of any ink, dye or pigment to practice the
Sawgrass Process, other than a SubliJet
ink purchased from Sawgrass or its authorized
reseller accompanied by a PLA, is not a licensed use of the Sawgrass Process. No rights to
use the Sawgrass Process, except those specified herein, are granted, and no rights to use
any other process, product, software or hardware developed or sold by Sawgrass are
granted or implied hereby.
2. LIMITATIONS ON REVERSE ENGINEERING You agree that you will not attempt to reverse
engineer, reproduce or deformulate the SubliJet
ink.
3. PATENTS AND COPYRIGHTS Sawgrass owns multiple U.S. and foreign patents, which
apply to the Sawgrass Process and/or the SubliJet
ink or its use. All patents in and to the
SubliJet
ink and the method of using the SubliJet
ink are owned by Sawgrass Systems,
Inc. You may not copy the printed materials accompanying the SubliJet
ink. All rights not
specifically granted under this PLA are reserved by Sawgrass Systems, Inc.
Epson has not manufactured, sponsored nor approved this product.
CAUTION:
•
For best printing results, use the ink within six months of purchase.
•
Keep out of reach of children.
•
Do not expose ink to temperatures above 100
º
F or below 40
º
F.
•
Keep ink out of direct sunshine.
Made In U.S.A.
Sawgrass Systems, Inc. agrees to replace any defective ink within a reasonable time, which
shall be Sawgrass’ sole responsibility for errors or defects in these goods.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. SAWGRASS SHALL NOT BE
LIABLE FOR LOSS OF PROFIT OR OTHER ECONOMIC LOSS, OR FOR INDIRECT,
SPECIAL, CONSEQUENTIAL OR OTHER SIMILAR DAMAGES.
SubliJet is a registered trademark of Sawgrass Systems, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of
their respective owners. Sawgrass Systems, Inc. disclaims any and all rights in those marks.
