Sawgrass SG1000EU, Руководство пользователя

Страница: 59 / 129

Setup and Installation | 52
The print head for cyan and black is [Head 1].
The print head for yellow and magenta is [Head 2].
Check which print head is missing nozzles by referring to the following illustration.
Normal
When a print head is missing nozzles
If the print head is missing nozzles, perform a Head Cleaning. See section "Head-
cleaning" for more information.
If the problem persists, perform Head Flushing. See section "Head-flushing" for more
information
.
Head-cleaning
Follow the procedure below to perform a print head cleaning.
Perform a head cleaning when print quality if affected by missing nozzles.
Head cleaning consumes ink but is sometimes necessary to achieve a full nozzle check.
After an ink cartridge is replaced, a print head cleaning will be automatically performed.

Perform a head cleaning up to five (5) times in an attempt to clear missing nozzles.

Print and check for any changes in the nozzle check test pattern between each
head cleaning.

Do not turn the printer off during print head cleaning. If the printer is turned off
during a print head cleaning, start again by printing a nozzle check test pattern.