5
How to mount
Using one of the supplied mounts, starting from the front-antenna end of
the detector, slide it into the mounting grooves on each side of the detector.
Position the detector so the front antenna looks through the windshield and
the rear antenna has a clear view to the rear of your car. Stay clear of the
wipers and the dark mask at top of the glass.
When the detector is properly oriented, the driver will see this view.
▶
Safety Warning
Because a detector on a windshield mount or a visor mount is not
permanently attached to the car, it could come loose in a crash, possibly
causing injury. Also, a passenger may move forward on impact and contact
the detector. Keep these possibilities in mind when you mount your
Valentine One Gen2.
How to connect to 12V
Plug one end of the supplied power cords into the detector’s RJ11 jack.
Plug the other end into the Lighter Adapter jack marked “MAIN” and insert
the adapter into the car’s 12V socket. If your vehicle has only a USB socket,
you’ll need to purchase a USB-to-12V Convertor.
Visor mount slides on from the front.
Install near center of windshield.
Install near center of windshield.
Plug in one end of the power cord into
V1 Gen2’s RJ11 jack. Plug the other
end into the Lighter Adapter.
Driver’s view
Driver’s view
