11. INSTALLING THE LIGHT
BULBS & GLASS SHADE
1. Install 3 x 60w candelabra bulbs
(provided). (Fig. 19)
2. Remove the decorative nut, glass cap
and metal nut from the light kit. Place glass
shade over the light kit stem, secure with
the metal nut (rubber side on the top)
glass cap and decorative nut.
Do not
overtighten
. (Fig. 19)
3. Insert the 2 pull chain through the eyelet
in the shade and cap. (Fig. 19)
4. Restore power and your light kit is ready
for operation.
9
Figure 19
12. FAN WITHOUT LIGHT
KIT
(OPTIONAL)
1. Disassemble the switch housing from
the light kit by removing nut and washer
on the center of switch housing, you can
keep the light kit for future use.
2. Attach the plastic plug to the switch
housing. (Fig. 20)
3. Install the switch housing to the
mounting plate with screws provided. (Fig.
20)
Figure 20
Mounting plate
Light kit
assembly
Plastic plug
Screws
Light kit
Pull chain
Bulbs
Glass shade
Metal nut
Glass cap
Decorative nut