5
6. INSTALLATION OF
SAFETY SUPPORT
An additional safety support is provided
to prevent the fan from falling. Secure the
safety cable to the ceiling joist with screw
and washer, as illustrated in Figure 6.
7. MAKE THE ELECTRIC
CONNECTIONS
Remember
to disconnect the power.
Follow the steps below to connect the fan
to your household wiring. Use the wire
connecting nuts supplied with your fan.
Secure the connectors with electrical tape.
Make sure there are no loose strands or
connections.
Step 1
Connect the fan supply (black) wire
and light supply (blue) wire to the black
household supply wire as shown in Fig. 7.
Step 2.
Connect the netura fan (white)
wire to the white netura household wire.
Step 3
Connect the fan ground wire
(green) to the household ground wire.
Step 4
After connecting the wires, spread
them apart so that the green and white
wires are on one side of the outlet box and
the black and the blue wires are on the
other side.
Step 5
Turn the connecting nuts upward
and push the wiring into the outlet box.
Figures 8 and 9 illustrate the wiring
connections for optional wall control (The
wire color out of wall control may vary, see
wall control's installation manual for
correct wire connections.)
Mounting bracket
Safety cable
Figure 6
Figure 7
Figure 8
BLK
WH
BLUE
BLK
WH
GRN
WIRING
BOX
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
BLUE
BLK
WH
WH
FAN
LIGHT
POWER LINES 120V
POWER LINES 120V
BLK
WH
BLUE
BLK
WH
FAN
LIGHT
BLK
BLUE
WH
WH
LIGHT
SWITCH
GREEN GROUND
GREEN GROUND