2.4. Assembly of flue spigot and blanking
plates
The stove is supplied with a connection flue spigot with
an inner diameter of 125 mm and an outer diameter of
139 mm.
2.4.1. Flue outlet on the top
Figure 2
Remove the top plate.
Fit the sealing rope 2 in the groove on the top and fix
the flue collar 1 with 3 bolts and washers supplied.
Replace the top plate.
2.4.2. Flue outlet at rear
Figure 4
Remove the top plate.
Remove the rear heat shield and remove the cut-out on
it (fig. 3).
Remove the retainer fuel (fig. 7, p. 6), the two side
bricks # 23 and 24 p. 10) and the flue baffle (fig. 8, p. 6).
Remove the blanking plate 3 and the clamp 4 and
assembly in the top, ensuring there is a good seal.
Fix the flue collar 1 at rear with 3 bolts and washers
supplied, ensuring there is a good seal.
Remove the cut-out in the rear heat shield and re-fit.
Replace top plate.
1
2
3
4
2
5
Figure 2 - Flue outlet on the top
1 - Flue collar
2 - Ceramic rope
3 - Blanking plate
4 - Clamp
5 - Top plate
Figure 3 - Rear heat shield
1
2
3
4
2
5
Figure 4 - Rear flue outlet
1 - Flue collar
2 - Ceramic rope
3 - Blanking plate
4 - Clamp
5 - Top plate
Document n° 986-1 ~ 02/07/1999
Réf. : 134 08 05
"SAVOY"
Multifuel stove
Technical manual
5