7
Figure 15
Mounting ring
Mounting
plate
Screws
Figure 14
9. INSTALLATING THE
MOUNTING PLATE
Step 1.
Remove the 1 of 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2.
Place the key holes on the mounting
plate over the 2 screws previously loosened
from the mounting ring, turn mounting plate
until it locks in place at the narrow section of
the key holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 14)
10. INSTALLING THE LED
LIGHT KIT & LIGHT
SHADE
NOTE:
Before starting installation, disconect
the power by turning off the circuit breaker
or removing the fuse at fuse box. Turning
power off using the fan switch is not sufficient
to prevent electric shock.
Step 1.
Remove the 1 of 3 screws from the
posts of the mounting plate and keep it for
future use. Loosen the other 2 screws. (Do not
remove) (Fig. 15)
Step 2.
While holding the LED light kit under
your fan, make the polarized plug connections:
- Red to white
- Black to black
Step 3.
Place the key holes in the LED light kit
over the two screws previously loosened from
the mounting plate. Turn the LED light kit until
the LED light kit locks in place at the narrow
section of the key holes. (Fig. 15)
Step 4.
Securely tighten the two light kit
mounting screws previously loosened and
the one previously removed. (Fig. 15)
Step 5
. Raise glass shade up against the LED
light kit, and secure it to fan by turning glass
shade clockwise until snug. DO NOT OVERTIGHTEN.
(Fig. 15)
LED Light kit
Screws
Mounting
Plate
Connection
plugs
Glass shade
