7
Figure 12
9. INSTALLATING THE
MOUNTING PLATE
Step 1. Remove the 1 of 3 screws from the
mounting ring and loosen the other 2
screws. (Do not remove)
Step 2. Place the key holes on the
mounting plate over the 2 screws
previously loosened from the mounting
ring, turn mounting plate until it locks in
place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one
previously removed. (Fig. 12)
Figure 13
10. INSTALLING THE LED
LIGHT KIT & LIGHT KIT
DECORATIVE RING
NOTE: Before starting installation, disconect
the power by turning off the circuit breaker
or removing the fuse at fuse box. Turning
power off using the fan switch is not
sufficient to prevent electric shock.
Step 1. Remove the four light kit mounting
screws from the posts of the mounting
plate. (Fig. 13)
Step 2. While holding the LED light kit
under your fan, make the polarized plug
connections:
- Red to white
- Black to black
Step 3. Place the LED light kit to the to the
mounting plate with the four light kit
mounting screws previously removed.
Securely tighten the four light kit mounting
screws. (Fig. 13)
Step 4. Raise light kit decorative ring
up against the LED light kit, and secure it
to fan by turning light kit decorative ring
clockwise until snug. Do not overtighten.
(Fig. 13)
Mounting ring
Mounting
plate
Screws
LED Light kit
Screws
Mounting
Plate
Connection
plugs
Light kit
decorative ring
