7
Figure 12
9. INSTALLING THE LED
LIGHT KIT & LIGHT SHADE
NOTE:
Before starting installation, disconect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.
If you do not plan to install the light kit with
your fan at this time, skip step 2 and 5.
Step 1.
Remove the 1 of 3 screws from the
posts of the mounting ring and keep it for
future use. Loosen the other 2 screws. (Do not
remove) (Fig. 12)
Step 2.
While holding the LED light kit under
your fan, make the polarized plug connections:
- White to white
- Blue to black
Step 3.
Place the key holes in the LED light kit
over the two screws previously loosened from
the mounting ring. Turn the LED light kit until
the LED light kit locks in place at the narrow
section of the key holes. (Fig. 12)
Step 4.
Securely tighten the two light kit
mounting screws previously loosened and the
one previously removed. (Fig. 14)
Step 5.
Raise plastic shade up against the LED
light kit, and secure it to fan by turning glass
shade clockwise until snug. DO NOT
OVERTIGHTEN. (Fig. 12)
Step 6.
If installing the optional metal light
cover, make sure is securely tighten. (Fig. 12)
LED Light kit
Metal light
cover
Screws
Mounting
ring
Connection
plugs
Plastic shade
assembly
