OPERATION
DELSAR
®
VICTIM SIMULATOR
5
7000-01-011 R07
www.savox.com
VICTIM SIMULATOR OPERATION
To operate, place the Victim Simulator on a smooth surface that is free of
loose debris, such as sand or soil. Depress the switch to the left to activate
unit immediately or press the switch to the right to select the remote control
operation. When remote control operation is selected, the unit can be turned
on or off from the remote control transmitter. Push the remote control once to
activate the thumper and push once again to turn off. Leaving the rocker switch
in the remote control position will cause battery drain even when the thumper
is not running.
The remote control can be programmed with a unique code to prevent
interference when using multiple Victim Simulators. The code is set in the Victim
Simulator unit by removing the top cover and selecting the desired code switch.
To remove top cover, remove the
four screws with a number two
Phillips driver.
Carefully lift the lid out of the
housing and turn over to expose
the circuit board attached to the
underside of the lid.
