Savin 8025e Скачать руководство пользователя страница 102

Страница: 102 / 160

Delivering Scan Files

Simultaneous Storage and Delivery

This section explains how to store a file and simultaneously deliver it.

Press

[

Store File

]

Make sure that

[

Send & Store

]

is selected.

If necessary, specify the stored file's information, such as

[

User Name

]

[

File

Name

]

, and

[

Password

]

For details, see “Specifying File Information for a Stored File”.

Press

[

]

Specify the destination, make any other necessary settings, and then send
the file.

For details about delivering a file, see "Basic Operation for Delivering Files".

Note

❒

Depending on the security setting,

[

Access Privileges

]

may appear instead

[

User Name

]

. For details about specifying

[

Access Privileges

]

, consult your

administrator.

❒

You can resend stored files. To resend stored files, select the files on the
screen for selecting stored files, and then send them. For details, see "Send-
ing a Stored File".

Reference

p.63 “Specifying File Information for a Stored File”
p.83 “Basic Operation for Delivering Files”
p.71 “Sending a Stored File”

Содержание 8025e

































































































































































Результаты поиска

Содержание 8025e

Отзывы:

Savin 8025e, Руководство по эксплуатации, Страница: 102 / 160

Результаты поиска

Содержание 8025e

Отзывы: