Savin 8025e Скачать руководство пользователя страница 79

Страница: 79 / 160

Sending a Stored File

Sending a Stored File

This section explains how to send a stored file.
Stored files can be sent by e-mail, Scan to Folder, or the network delivery scan-
ner.

Note

❒

There are two methods of sending stored files. Settings made under

[

Scanner

Features

]

determine which method is used. For details, see General Settings

Guide.
• To send the URL by e-mail:

Under

[

Scanner Features

]

[

Stored File E-mail Method

]

, select

[

Send URL Link

]

This method is useful when network restrictions prevent you sending at-
tachments.

• To send an attached file by e-mail:

Under

[

Scanner Features

]

[

Stored File E-mail Method

]

, select

[

Send File

]

Sending Stored Files

This section mainly explains how to select the files you want to send.

Press

[

Select Stored File

]

The list of stored files appears.

Select the file you want to send.

You can select multiple files.
If you select multiple files, the files are sent in the selected order.
If you press

[

Display Selection

]

, files you have selected are displayed in the or-

der they will be sent.

Press

[

]

Содержание 8025e

































































































































































Результаты поиска

Содержание 8025e

Отзывы:

Бренды по названию

Популярные бренды

Savin 8025e, Руководство по эксплуатации

Результаты поиска

Содержание 8025e

Отзывы:

Бренды по названию

Популярные бренды