Savin 1302, Справочник принтера

Страница: 71 / 90

Printer Features Parameters
29
4
❖ ❖ ❖ ❖
System
Toner Saving You can select whether to enable Toner Saving.
• Off
• On
Note
❒
Default: Off
❒
If “Toner Saving” is “On”, “EdgeSmoothing” is ignored even
if it is “On”.
❒
The setting in the printer driver takes priority of the setting on
control panel.
Menu Description
I/O Timeout You can set how many seconds the printer should wait before
ending a print job. If data from other port often appears in the
middle of the print job, you should increase the timeout value.
15 seconds, 30 seconds, 60 seconds, 180 seconds, 300 seconds
Note
❒
Default: 30 seconds
I/O Buffer You can set the size of the I/O Buffer. Normally it is not necessary
to change this setting.
16 KB, 32 KB, 64 KB, 128 KB, 256 KB, 512 KB
Note
❒
Default: 32 KB
Print PS Errors You can set whether the PS error sheet should be printed out.
• Off
• On
Note
❒
Default: Off
Page Protect When the "Print Overrun. Job Incomplete.” message appears on
the panel display, set this function to "On”.
• Auto
• On
Note
❒
Be sure to return “Page Protect”to “Auto” after the print job.
With “Page Protect” “On”, the printer performance might be
decreased.
❒
Default: Auto
❒
The setting in the printer driver takes priority of the setting on
control panel.
Menu Description