Savi ST-618, Руководство по установке

Страница: 12 / 16

Security hole
Savi ST-618 Asset Tag Installation Guide
12
Replacing the Battery
The tag is equipped with non-volatile memory, which means stored data is
not lost when you replace the battery.
1. Remove the battery cap.
2.
Remove the discharged battery from its compartment
For more information, see “Activating the Tag” on page 6.
Note: The lithium battery can be harmful to the environment. Follow
current procedures for safely disposing of lithium batteries. The battery
cannot be reused or recharged.
3. Install a 3.6V lithium “A” battery, matching the negative (–) and posi-
tive (+) terminals to the symbols shown on the tag housing. The tag
will not work if you install the battery in the wrong direction
(reversed).
4. Replace the battery cap on the tag.
Whenever a battery is inserted into a tag, the tag will emit 5 short
beeps, one second apart.
Then, the tag will emit 2 short beeps to indicate adequate battery
voltage or 3 beeps to indicate inadequate battery voltage. 3 short beeps
means the tag needs a fresh battery.