Save Phace Gen X, Руководство по сборке

Страница: 5 / 8

5
FOREHEAD AND VISOR INSTALLATION AND REMOVAL
Removal:
First remove the lens. Then with a magnetic Phillips screwdriver, unscrew the screws located in
the mask top ventilation piece.
Installation:
Line up the accessory you are trying to install with the screw hold located in the top ventilation piece.
FOREHEAD AND VISOR INSTALLATION AND REMOVAL
Installation:
Starting in the middle, using a magnetic screwdriver, loosely install one screw at a time. When all
screws have been installed, tighten each one until the accessory is firmly in place.
Removal:
Reverse installation order.
Ocular Marking
SP: The manufacturer’s identification mark.
EN 166: Number of this standard.
2: Optical Class markings after the manufacturer’s identification mark.
S: Increased Robustness marking after Optical Class marking.
O: Marking identifying the ocular is an original part.
Frame Marking
SP: The manufacturer’s identification mark.
EN166: Number of this standard.
S: Increased Robustness marking (S)
Complies with European Standard En 166.2001
Notified Body – INSPEC, 56 Leslie Hough Way, Salford, M6 6AJ, UK. NB number 0194