Consult manage
Signify information type
ERR the state of the indicator
Normal
Without error
Not light
Normal,just prompt take
attention to the locked data
PLC have the component which
locked
Yellow flicker: On 0.2 seconds and
Off 0.8 seconds
Modificate the PLC hardward
configure
Problem in the soft setting ,permit
user keep on operate the user
program
Yellow flicker: On 0.2 seconds and
Off 0.8 seconds
Check module parallel bus
(check the RTC battery;
check extension module
power supply)
Communication abnormal between
modules, auto dislodge the
abnormal module, permit user keep
on operate the user program
Yellow flicker: On 0.8 seconds and
Off 0.2 seconds
Upgrade the fireware or
modify the user program
Fireware abnormal or user program
abnormal,can not operate the user
program
Red slowly flicker:indicator light
0.5s not light 0.5s
Maintain
Hardware error,user program con
not running
red constant light
5. Power Supply Specification
Item
AC Power Supply
DC Power Supply
Power Supply Voltage
100~240VAC
DC24V
-15%~+20%
Power Supply Frequency
50~60Hz
——
Power Consumption
25VA MAX
——
Instantaneous Surge
20A 1.5ms MAX @220VAC
20A 1.5ms MAX @24VDC
Power Loss Time
20ms or less @220VAC
10ms or less
Fuse
2A, 250VAC
2A, 250VAC
5V Output Voltage (for CPU)
5V, -2%~+2%, 1.2A MAX
5V, -2%~+2%, 1.2A MAX
24V Output Voltage (for
output and extension)
24V, -15%~+15%, 500mA MAX
24V, -15%~+15%, 500mA MAX
24V Output Voltage (for input
and peripheral)
24V, -15%~+15%, 300mA MAX
Use external 24VDC
power
supply
Insulation Type
Transformer isolation or
optoelectronic isolation
,1500VAC/1 minute
No Electrical isolation
Power Protection
DC24V output over current
DC input power polarity reverse,
over voltage
6. Environmental Specifications for Product
Item
Environment Specification
Temperature/Humidity
Operating temperature:0~+55
℃
Storage temperature:-25~+70
℃
Humidity: 5~95%RH, No condensation
Vibration Resistance
10~57 HZ, amplitude=0.075mm, 57HZ~150HZ acceleration=1G, 10
times each for X-axis, Y-axis and Z-axis
Impact Resistance
15G, duration=11ms, 6 times each for X-axis, Y-axis and Z-axis
Interference Immunity
AC EFT:±2500V
Surge:±2500V DC EFT:±2500V
Surge:±1000V
Over Voltage Resistance
1500VAC/1min between AC terminal and PE terminal, 500VAC/1min
between DC terminal and PE terminal
Insulation Impedance
≧
5MΩbetween AC terminal and all input/output points to PE terminal
@500VDC
