The Standby Saver for all appliances that waste power in standby.
Automatic shut-down the 4 SAVER SIDE sockets by remote control.
Automatic shut-down after 40 minutes if no one is in the room.
Operating the Power Strip manually.
You can switch the SAVER SIDE on and off with the black button on the top of
the control box.
Surge Protection.
The Power Strip also has Surge Protection built-in to protect all of your
connected appliances in the ALWAYS ON and SAVER SIDE.
Reset button.
If devices plugged in are taking more power than the Power Strip is rated
to supply, it will automatically turn off for safety. Should this occur press the
Reset button on the Power Strip to restore power (see diagram).
Restore Factory Settings.
To reset the Power Strip to the original factory settings press and hold the
button on the top of black control box for 5 seconds.
Warrenty Information.
SavaSocket products are warranted against defects in materials and
workmanship for a period of one year. Please register your Power Strip 6
online at www.savasocket.com/support. When registering for warranty you will
need the Serial number which is located on the base of the Power Strip.
To help the environment, we recommend that the
Power Strip 6 is disposed of at a recycling centre. RoHS & WEEE compliant.
Note:
If the supply cord is
damaged it shall be replaced by
the manufacturer, service agent
or qualified person to avoid hazard.
How does the Power Strip 6 work?
The control box has a Passive Infrared Sensor ‘eye’ which monitors the space
in front of it for movement. If there is no movement in the room for 37 minutes
the Power Strip will bleep twice, if there is still no activity or use of the remote
control within the next 2 minutes then the Power Strip bleeps 6 times. These
bleeps indicate that all items plugged in the ‘SAVER SIDE’ will shut down in 1
minute. Any movement in the room or remote control signal during the 39 min-
utes, resets the Power Strip’s sensor and timer. This feature is designed to save
electricity. When appliances are left ON or on standby you are using electricity
and therefore unnecessarily wasting money.
FAQs
1. Do I need a special remote control to use Power Strip? No, you can use any
home infrared remote control.
2. I am having problems getting the Power Strip to learn my remote control
button? When programming the Power Strip make sure you are away from
bright lights and direct sunlight as they can emit infrared signals that may
interrupt the programming. If you are still having problems, try changing the
batteries in the remote control.
3. How far away can I be from the Power Strip and still use my remote control?
This depends on the model and how good the batteries are, but generally up
to 7m would be ok.
4. Can I add an extension lead to one of the 4 sockets controlled by my
remote? Yes, you can add an extension lead to give you more sockets.
5. Can I connect my audio system to the Power Strip? Yes.
6. Can I connect my games console to the Power Strip? Yes, the more items
you connect that can be left on standby, the more money you will save.
7. How much energy does a Power Strip use in standby? 0.19 watt.
8. Why does it take 5 seconds for the Power Strip to shut down? The built-in
‘soft shut down’ feature helps further extend the life of connected items.
