8
V1504 Owner’s Manual
Part No. 000692, 30-m06-2017
3. OPERATION
Attendant Operation
•
The attendant shall only operate the lift from the call station located at
the lower landing if the lift is unenclosed.
•
The attendant shall have full view of the floor area under the lift and of
the rider at all times.
•
If the lift is enclosed, the lift can be operated from the upper landing
provided the operator has view of the rider at all times.
•
During attendant operation, the car directional controls must not be
operational.
Operating from the COP Controls
Figure 2 shows a sample car operating panel (COP) for a four-landing
installation.
Figure 2
To operate the V1504 from the COP controls:
1
Insert the key into the switch (if equipped) and turn it to the ON position to
activate the operating buttons.
2
Press the appropriate landing button to move the lift to the destination.
Note that the V1504 will not move if one of the doors is open.
3
When the lift reaches the landing, the door will unlock automatically (for
units with mechanical GAL locks). For units with an electric strike, the door
will unlock automatically for a few seconds when the lift reaches the
landing. If you need to re-open the door after the delay, turn the key (if
applicable) to the ON position and press the call button again to unlock the
door.
4
To prevent unauthorized use of the lift, take the key out when the unit is not
in operation.
Emergency stop
Alarm button
Key switch
Landing buttons
Содержание V1504
Страница 19: ......