Savari StreetWAVE SW-1000 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 16

Savari StreetWAVE SW-1000 Скачать руководство пользователя страница 13

StreetWAVE™SW-1000™ Installation Guide

Savari Inc., Confidential
Copyright © Savari, Inc. 2017

13

Figure 11 Top View Showing DSRC Antenna Connectors

A suitable GNSS antenna with an SMA connector can be used to connect to the RSU. The
SMA connector is found at the bottom of the enclosure. The operator may choose a magnetic
mount antenna or an antenna with a separate mounting capability. When ordered, Savari
typically supplies a magnetic mount GPS antenna with at least 1 meter RG-174 or equivalent
cable. Ensure that the GNSS antenna is placed such that it has a clear view of the sky. It has
been found that a GPS or a GPS + GLONAS antenna can be used.

Figure 12 Bottom View Showing the GPS and Ethernet Connector

For extra protection, wrap self-sealing electrical tape around the antenna connectors and the
GPS connector to prevent water from entering. The tape should cover the entire RSU
connector, the antenna connector and at least an inch of the antenna cable or the antenna
itself.

«
...
11
12
13
14
15
...
»

Содержание StreetWAVE SW-1000

















Отзывы:

Нет отзывов