MW-1000™ User Guide
8
3.8 LEDs
MW-1000™
comes with the following three LEDs on the panel to indicate the following:
Power
BSM Transmission (Tx)
Diagnostics (currently used to indicate USB drive mounted/unmounted status)
3.9 Ethernet
MW-1000™
consists of one Ethernet port (eth0) on the panel
.
3.10 USB
MW-1000™
supports USB drive, and it is mounted in the following location-
/mnt/usbdrive
Note:
By default,
MW-1000™
devices do not log the CML and SML messages in the USB
drive.
3.11 WiFi
It provides WiFi capability in 2.4 GHz and 5GHz band. By default, configured for 2.4 GHz. It is
used for HMI connection and maintenance purpose.
By default, when the board comes up, the process will be started as below.
2081 root 3304 S /usr/local/bin/hostapd -B /etc/config/hostapd-minimal.conf
Any changes done in this file can be applied by restarting savari-hmi.
/etc/init.d/savari-hmi stop
/etc/init.d/savari-hmi start