Wally 5.5 inch In-Wall Touch Screen
Quick Reference Guide
For Product Info
ITP-E5500x | 009-1474-00 | 170515
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2017 Savant Systems, LLC
1
of
2
| 508.683.2500
Box Contents
(1) Wally 5.5 inch In-Wall Touch Screen
(1) Installation Kit
(1) Mounting Bracket (For standard 1-gang electrical box)
(2) Mounting Bracket Screws (6-32 x 1 in.)
(1) Quick Reference Guide (this document)
Specifications
Environmental
Temperature
32° to 104° F (0° to 40°C)
Humidity
10% to 90% RH (non-condensing)
Dimensions and Weight (Product)
section.
Standards
Ethernet
10/100/1000 Gigabit Ethernet Adapter
Power
PoE
802.3af compliant
Regulatory
Safety and
Emissions
FCC Part
15
Class B
CE
WEEE
RoHs
Compliant
Minimum Supported Release
Savant OS
da Vinci 8.4
Network Requirements
Savant requires the use of business class/commercial grade network
equipment throughout the network to ensure the reliability of
communication between devices. These higher quality components
also allow for more accurate troubleshooting when needed.
Connect all Savant devices to the same local area network (LAN) or
subnet as the Host. Savant recommends not implementing any type
of traffic or packet shaping in your network topology for the Savant
devices as this may interfere with performance.
Network Configuration
To ensure that the IP Address will not change due to a power outage,
a static IP Address or DHCP reservation should be configured. Savant
recommends using DHCP reservation within the router. By using this
method, IP Addresses for all devices can be managed from a single
UI avoiding the need to access devices individually.
Setting DHCP reservation varies from router to router. Refer to the
documentation for the router to configure DHCP reservation.
Network Changes
If the IP Address range in your network has changed, Savant
recommends the following steps to refresh any IP connection and
ensure that the display is communicating with the network correctly.
-
Using a paper clip or similar, press and release the Reset button
on the side of the touch panel (See
descriptions
section). Allow the display to reset and obtain a new IP Address.
Proximity
Sensor
Sensor (proximity) mounted in front panel
will wake up the display when movement is
detected in front of display.
Embedded
Speaker
For future use
Mounting
Slots
Slots for mounting touch panel to mounting
bracket. Insert tabs from the mounting
bracket into these slots. Once inserted,
secure the touch panel to the bracket using
the two captive screws.
Link LED
Solid Orange
- Link is established.
Off
– No link established
Link Activity
LED
Green Blinking
- Indicates data activity.
Off
– No Activity
Ethernet
8-pin RJ-45 port:
-
10/100/1000 Base-T auto-negotiating
port with link and activity LEDs
-
PoE – 802.3af compliant
Alternate
Power Input
Not Used
Reset Button
Using a paperclip or similar, press and
release Reset button to reset the display.
Embedded
Microphone
For future use
LCD Display Specifications
ITP-E5500x
Viewing Image (IPS)
5.5 in (13.97 cm)
Resolution
720 x 1280 | 16.7M colors
Height
5.85 in (14.86 cm)
Width
3.44 in (8.74 cm)
Depth (overall)
1.33 in (3.38 cm)
Depth (mounting)
1.00 in (2.51 cm)
Weight (display only) 0.35 lb (0.16 kg)
Weight (ship)
0.75 lb (0.34 kg)
A
B
C
D
E
F
G
H
I
Front Panel
Rear Panel
