The Savant® HTX-SLN501 SmartLink HDBaseT™ Transmitter is
capable of transmitting:
•
HDMI audio and video
•
IR and RS-232 control
•
Ethernet
•
Power over HDBaseT (PoH) up to 328 ft (100 meters) via a single
Cat 5e/6/7 cable.
Endpoints can be a Savant HDBaseT receiver or any HDBaseT
compliant receiver.
IMPORTANT!
The HDBaseT connections on the SmartLink Matrix are 5Play
compliant and feature Power over HDBaseT (PoH) which can
supply power to compatible HDBaseT receivers.
Read the
Using Power over HDBaseT (PoH)
section before
making any connections to avoid damaging connected devices.
Box Contents
(1) SmartLink (HTX-SLN501)
(1) Installation Kit (075-0167-xx):
(1) 12V DC 1.6A Power Supply with Multi-country plugs
(025-0166-xx)
(2) M3 x 4 mm Screws (039-0302-xx)
(1) Wall Mounting Bracket (071-0872-xx)
(1) 4 in Cable Tie (014-0071-xx)
(1) 4-Pin Screw Down Plug in Connector (028-9395-xx)
(1) Quick Reference Guide (this document)
Specifications
Environmental
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-
condensing)
Cooling
25 cubic feet per minute (CFM)
recommended.
Maximum BTU
7 BTU/hr
Dimensions and Weight
Dimensions and Weight
Height
0.94 in (2.39 cm)
Width
4.56 in (11.58 cm)
Depth
3.18 in (8.07 cm)
Weight
Shipping: 1.35 lb (0.61 kg)
Power
Power
Power Supply
12V DC 1.6A
120-230V AC 50/60Hz
Maximum Power
6 Watts
18 Watts (when powering remote receiver)
Regulatory
Regulatory
Safety and Emissions
FCC Part 15 | CE Mark | C-Tick
RoHS
Compliant
Enclosure
Enclosure
Metal enclosure with Savant’s Design Signature, black
Metal enclosure with Savant’s Design Signature, black
Minimum Supported Release
Minimum Supported Release
Savant OS
da Vinci 6.0.1
Front Panel
12 VDC
12V DC 1.6A - Connect to included power
supply.
Link Status
LED
Green:
Link with HDBaseT 5Play compatible
receiver has been established.
Red:
Power is present, but link to HDBaseT
5Play™ compatible transmitter has not been
established.
O
ff
:
HTX-SLN501 is not receiving power.
Ground Connector (Optional) - Used to
connect to a suitable ground reference when
using Power over HDBaseT (PoH).
Link
8-pin RJ-45 female shielded
HDBaseT 5Play compatible - Connect to Link
connection on SmartLink HDBaseT Receiver,
SmartLink HDMI Matrix or 3
rd
party HDBaseT
5Play compatible receiver.
Rear Panel
IR In/Out
4-pin Screw Down Plug-in Connector
IR In:
Receives IR Signals from a Savant or 3
rd
party controller to control devices located
near the endpoint.
IR Out:
Sends IR signals received from the
endpoint to control devices located near the
start point. Can be connected to an IR
Flasher or directly to a device’s IR Input.
for important precautions
regarding IR functionality before making any
connections.
HDMI In
19-pin type A HDMI female
Supports HDMI and DVI (DVI/D Compatible)
DVI requires DVI to HDMI adapter (not
included)
LAN
RJ-45 10/100 Base-T, auto-negotiating port
with Link/Activity LEDs.
Link LED
O
ff
:
Ethernet link is not established.
Green Solid:
Ethernet link is established.
Green Blinking:
Ethernet activity is occurring.
Data Rate
LED
O
ff
:
10 Mbps data rate
Green:
100 Mbps data rate
RS232
Used to transmit and receive serial binary data
to and from serial controllable devices located
at the end point. 8-pin RJ-45 female.
See
for pinouts.
HTX-SLN501-00 | 009-1102-07 | 160222
HTX-SLN501-00 | 009-1102-07 | 160222
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2016 Savant Systems, LLC
1 of 2
SmartLink HDBaseT™ Transmitter
Quick Reference Guide
For Product Info
