PAV-VIMVP1F2-xx/PAV-VIMVP1CP2-xx QRG | 009-2059-00
Copyright 2022 Savant Systems, Inc | 220121
45 Perseverance Way, Hyannis, MA 02601
1 of 2
Box Contents
(1) IP Video Transmitter (PAV-VIMVP1F2-xx/PAV-VIMVP1CP2-xx)
(1) SFP+ module (PAV-VIMVP1F2-xx only)
(1) Installation Kit (075-0210-xx)
(1) Power Adapter with International Clips (025-0195-xx)
(1) International Clips (CN, US, UK, EU & AUS)
(2) Mounting Brackets (071-1093-xx)
(4) M2.5 x 4mm screws (for mounting brackets) (039-0590-xx)
(1) IR Emitter (4ft long) (064-0442-xx)
(1) 3-pin RS232 Control Connector (028-0805-xx)
(1) Product Regulatory Statement (009-1950-xx)
Required Components
–
Savant IP Video Receiver
–
Savant System Host
–
Savant qualified 10G Managed Network Switch
–
Savant User Interface
–
Savant Development Environment (SDE) and Configuration Tools
Compliance
Safety and
Emissions
FCC Part 15
CE
C-Tick
UKCA
RoHS
Compliant
Power
Input Power
12V 3A DC
PoE+ (IEEE 802.3at)
Nominal Power
16 W (PAV-VIMVP1F2-xx)
19 W (PAV-VIMVP1CP2-xx)
Maximum Power
36 W (PAV-VIMVP1F2-xx)
36 W (PAV-VIMVP1CP2-xx)
Dimensions and Weights
Height
Width
Depth
Weight
Device
0.98 in
(2.50 cm)
8.46 in
(21.50 cm)
5.51 in
(13.99 cm)
1.65lb
(0.75 kg)
Shipping
4.0 in
(10.16 cm)
9.0 in
(22.86 cm)
16.0 in
(40.64 cm)
4.8lb
(2.17 kg)
Rack Space
1U
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Specifications
Supported Releases
Software Release
da Vinci 9.4.
3
and higher
Front Panel
Additional Information
Refer to the following documents located on the
Savant Customer
Community
for additional information.
– Savant IP Video Deployment Guide (009-1977-xx)
– Savant IP Video Network Configuration Guide (009-1552-xx)
– Savant IP Audio Deployment Guide (009-1571-xx)
–
Savant Device Networking Guidelines
System
G
USB HOST
H
I
P1
J
USB HID
Video
C
LinkTx
D
USB
F
LinkRx
E
Status
B
Power
A
Item
Description
Power LED
Off
- Device is off. No power applied.
Red
- Main board is powered.
Status LED
Blue
- Reset button is pressed when the
device is powered on.
Blinking
- Reset button has been released or
the device was powered on without holding
the reset button.
Video LED
Off
- No video signal detected.
Blue
- Video signal detected.
Link TX LED
Off
-
No valid connection
Blue
- Valid link
Blinking
- Sending Ethernet Data
Link RX LED
Off
- No valid connection
Blue
- Valid link
Blinking
- Receiving Ethernet Data
USB
Reserved for future use.
System LED
Not used and will remain in the
OFF
state.
H
USB Host
Reserved for future use.
I
USB HID
Reserved for future use.
J
P1
Reserved for future use.
A
B
C
D
E
F
G
Audio
Supported
Formats
Pass-though of all HDMI audio formats are
supported.
Video
HDR
Supported
Dolby® Vision
Supported
Supported
Formats
640x480
5
1280x720
4
1920x1080
4
3840x2160
3
720x480
5
1280x720
5
1920x1080
5
3840x2160
4
720x576
4
1280x1024
5
1920x1200
5
3840x2160
5
800x600
5
1920x1080
1
3840x2160
1
4096x2160
3
1024X768
5
1920x1080
3
3840x2160
2
4096x2160
5
1 = at 24 Hz
2 = at 25 Hz
3 = at 30 Hz
4 = at 50 Hz
5 = at 60 Hz
Supported Audio and Video Formats
Networking Guidelines
To ensure that the IP Address will not change due to a power outage,
Savant recommends using DHCP reservation within the router. By
using this method IP Addresses for all devices can be managed from a
single UI, avoiding the need to access devices individually.
NOTE:
IP video device requirements and how to manage IP address-
es are available on the
Savant Device Netwoking Guidelines
on the
Savant® IP Video Single Input Transmitter 4K UHD with Video Processing and Control
(PAV-VIMVP1F2/PAV-VIMVP1CP2)
Quick Reference Guide