HRX-4KVLCxxx | 009-1885-00 | 191108
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2019 Savant Systems, LLC
2 of 2
Savant.com | 508.683.2500
Further Product Information
To view available documentation, detailed product specs, and more:
–
Visit the Savant Knowledge tab via the
to search all Savant documentation.
IR Wiring
IR Control is pass-through only.
IR Emitter
Connect to 3.5 mm IR Out to control a IR device.
Installation
An HDBaseT receiver can be placed on a standard 1U rack shelf. Or the
extender can be installed using the included mounting brackets.
To install the mounting brackets follow the steps below.
1. Remove the two case screws on the side of the device
(Shown in the image below).
2. Align the bracket using the top of the slot.
NOTE
: This will leave an air gap behind the device.
3. Use the mounting screws to attach the bracket.
1
2
4. Repeat steps 1 to 3 for the other side.
