Thank you for your purchase.
For proper use and maintenance of your Savannah Maxi Scale, please read
the instructions completely before operation and retain for future reference.
Key function
Switching off
• Switch the scale off by pressing and holding TARE for 2 seconds.
• Scale will auto-off after approximately 60 seconds when
not being used.
Operation
Weighing
Step 1: Place the scale on a hard and flat surface.
Step 2: Press TARE once, the LED display will show zero
Step 3: Put food on the platform. Weight will be displayed.
TARE function
Step 1: Place a container on the platform. LED display will show the weight
of the container
Step 2: Press TARE to clear the weight of the container – scale will re-set
to zero. Place food into the container. LED display will show the
weight of the food only. To weigh multiple food items, press TARE
between each placement of food into the container.
Step 3: Removing the container and food, LED display will show the
negative value of the container. Press and hold TARE again,
the platform will show zero after 2 seconds.
HOLD function
Step 1: Press and hold MODE for 2 seconds to switch on the HOLD
function. LED display will show ‘H-ON’.
Step 2: Place food onto the platform. LED display will show the weight of
the food. It will beep once and the weight will be locked. The weight
will remain displayed when you remove the food from the platform.
Step 3: When a weight has been locked, you can add another weight that
exceeds 5kg to unlock it, or press TARE. Scale will return to zero.
Inserting the batteries
• Open the battery cover.
• Install 4 x 1.5V AA batteries as shown.
• After installing the batteries, replace the battery cover.
* Please be aware that the incorrect polarity will cause
permanent impact on the electronic parts.
Error Indication
Low Power
Overloaded scale – weight exceeds 15kg.
Advice for care and use
• Place scale on a hard and flat surface to ensure the greatest accuracy.
• Don’t drop or subject the scale to shocks as this may damage the unit.
• Don’t use abrasive cleaners.
• Clean the scale with a damp cloth, but don’t allow water to enter the scale.
• To protect the life of the scale, keep out of hot or wet environments.
• Remove battery from scale if it has not been used for a long period.
• If scale does not operate, check battery is correctly positioned. Battery
may become flat when scale is not used for prolonged periods of time,
and may need replacement.
• Don’t store the scale in an upright position, always store flat.
• Ensure no water comes in contact with scale.
• Don’t stack other items on top of scale when storing.
• Not for commercial use.
Due to continuous improvements, this product is subject to change without
notice; The product appearance or colour may vary.