Sav SAV 531.42, Руководство по эксплуатации

Страница: 75 / 112

EN
3 TECHNICAL SPECIFICATIONS
3. TECHNICAL SPECIFICATIONS
Model
BM 1350 BM 2500 BM 3600 BM 5000 BMP 1800 BMP 3600
Length [mm] 272/309 402/437 1030/1050 1202/1200 470/475 760/764
Width [mm] 242/262 242/262 242/262 242/300 238/242 253/263
Height [mm] 508 512 512 527 659 713
Inner height of the lifting
eye [mm] 90 90 90 90 90 90
Suspension height [mm] 483 487 487 502 634 688
Battery capacity [Ah] 35 75 75 75 75 75
Input voltage
(50 – 60 Hz) [V AC] 230 230 230 230 230 230
Power [W] 55 72 103 144 130 144
Magnet weight [kg] 60 72 180 203 167 420
Operating period at
50 % utilisation [h] 8 8 8 8 8 8
Flat materials
Lifting capacity (coeff.
2:1)* [kg] 1350 2500 3600 5000 1800 3600
Minimum thickness for the
maximum lifting capacity [mm] 38 50 25 50 50 70
Tested lifting capacity [kg] 2700 5000 7200 10000 3600 6800
Round materials
Lifting capacity [kg] – – – – 1130 2260
Diameter (d
min.
– d
max.
) [mm] – – – – 40-440 45-500
Tested lifting capacity [kg] – – – – 2260 4520
* Flat materials used for testing the pull-off force – thickness 80 mm, Ra 1,6, S 235 JR (St 37).
SAV classification no.: 531.42
Max. load temperature: 70 °C
Max. ambient temperature: 50 °C
Special specifications for 531.99: Please note the Appendix (for special version)
Please note the current catalogue data sheets – printed or on the Internet (www.sav.de).
Other technical specifications for custom versions can be taken from the Appendix.
DANGER!
Risk of crushing!
The load can be released if the maximum lifting capacity is exceeded. There
is a risk of crushing.
■
Never lift any workpieces that exceed the values in the table (page 21).
■
The sheet thicknesses and wall thicknesses for tubes must not fall below
the stated minimum values.
SAV 531.42
Version 1.0
[
75
]