sauter FC, Инструкция по эксплуатации

Страница: 11 / 15

FC-BA-e-2020 11
6.9.2 Default value outputs
Two preset value outputs form an open collector in the NPN version.
The circuit diagram below shows the inner default value circuit:
Pins 6 and 7 are switched on after the overload alarm is triggered.
In setting mode, pins 6 and 7 are switched on after the upper limit value has been
exceeded, and pins 4 to 6 - after the lower limit value has been fallen below.
Max. permissible voltage: for pins 7 to 6 and 4 to 6 the voltage must be below
35V, and for pins 6 to 7, pins 6 to 4 below 6V!