Saunas.com IG-610, Инструкция по эксплуатации

Страница: 7 / 14

5. Place the Bench Support panel first and then place the Bench surface panel into the
sauna room.
※
On larger sauna rooms with more than one bench
※
Slide the Bench Support Panel down the wooden supports with the heater facing out.
※
Make sure the two side slots of the Bench Support Panel slide completely into the
corresponding grooves of the wooden supports . (Refer to picture 1)
※
Connect the power connector from the back of Bench Support Panel to the floor
Panel. Ensure the connection is completely fastened(Refer to picture 2)
※
Place the Bench Surface Panel on the Bench Support Panel and slide toward the Back
Wall until half. (Refer to picture 3)
※
Connect the power connector from the back of Bench Support Panel to the Right
Wall Panel. Ensure the connection is completely fastened; attach cover with the provided
screws. (Refer to picture 4)
※
Connect the power connector from the back of Bench Support Panel to the left
Wall Panel. Ensure the connection is completely fastened; attach cover with the provided
screws. (Refer to picture 5)
※
Place the Bench Surface Panel on the Bench Support Panel and slide toward the Back
Wall until flush to the Back Wall.
Picture 1 Picture 2
Picture 3 Picture 4
IG 610-EX/E100-X-3 6 09/18/09