Saunagen PH-I, Руководство пользователя

Страница: 16 / 27

Digital Control Panel Operating Instructions
a) Press TEMP UP/DOWN ARROWS to adjust temperature, temperature value will increase or
decrease by 1 degree at a time.
b) By holding down the UP/DOWN ARROWS, you can speed up the rate of change.
c)
0
F(or
0
C) will be lit to indicate changes being made to temperature setting.
d) If you don’t input anything during 5 seconds, TEMPERATURE DISPLAY will stop, glint
value will be stored in memory as preset value and will be displayed at next start up. And the
TEMPERATURE DISPLAY value shows the sauna room inside current temperature.
e) During session time, when the temperature reaches the setting level on the control panel,
“Warming” indicator light will be off, micro-control will force the heaters to stop heating and
keep a constant-temperature status. The heaters will turn off and on periodically in order to
maintain the desired temperature inside the sauna.
3. Switch between
0
F and
0
C
You can alternate between Fahrenheit and Celsius while in setting mode by pressing
0
F /
0
C
button.
16