11
11065435 • Rev AD • October 2011
DH and DS Motors
Assembly and Test Procedures
Assembly
Motor Assembly
(continued)
Install Distributor Plate
5. Mount the distributor plate on the
housing and place the cardan shaft
into the spool shaft
On smaller displacements, be sure to
place the end of the cardan shaft with the
longest splines into the spool shaft.
Install Gear Set
6. Grease an O-ring and place it in the
O-ring groove on the bottom side of
the gear set.
For larger displacement gear sets, the
bottom side has recessed splines in the
gear wheel.
7. Place the gear set onto the cardan
shaft so that the smallest gap
between the gear wheel and the
gear rim face opposite the system
ports and the internal splines of the
gear wheel line up to those on the
cardan shaft.
For smaller displacements, retain the
cardan shaft using the fork tool.
