Step 11
å
Fasten three ANGLE BRACKETS (X) to the FRONT
MOLDING (L). Use three BLACK 9/16" LARGE
HEAD SCREWS (II).
å
Fasten the TOP MOLDING (P) to the FRONT MOLDING (L).
Use three BLACK 9/16" LARGE HEAD SCREWS (II).
å
NOTE: There are no pre-drilled holes in the TOP
MOLDING (P). The SCREWS will tighten into the grooves.
401902
www.sauder.com/services
Page 16
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
II
X
(3 used)
P
L
Groove
