Step 11
409937
www.sauder.com/services
Page 16
å
Carefully turn your unit over onto its front edges. Unfold
the BACK (F) and lay it over your unit.
å
Make equal margins along all four edges of the BACK (F).
Push on opposite corners of your unit if needed to make
it “square”.
å
Fasten the BACK (F) to your unit using the NAILS (RR).
å
NOTE: Be sure to tap NAILS into the holes that line up
over the UPRIGHT (C).
å
NOTE: Perforations have been provided for access
through the BACK. Carefully cut out the holes needed.
NAIL
(47 used in this step)
RR
F
Printed information
must be facing up
.
These holes must line up
over the UPRIGHT (C).
Cut-out
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
