Step 6
å
Carefully turn your unit over onto its front edges. Unfold
the BACK (G) and lay it over your unit.
å
Make equal margins along the top and both side edges
of the BACK (G). Push on opposite corners of your unit if
needed to make it "square".
å
Fasten the BACK (G) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up
over the UPRIGHTS (C and D).
408750
www.sauder.com/services
Page 10
C
D
G
These holes must line up with the UPRIGHTS (C and D).
For support, place packing
foam and magazines here.
Do not tap NAILS along the
bottom edge of the BACK.
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
NAIL
(38 used in this step)
1N
