å
NOTE: Before you start this step, separate the BROWN 1"
SCREWS (III and JJJ). This step will use the larger of the
two 1" SCREWS. Refer to the hardware page 4 for the
correct screw size.
å
Fasten the SKIRT (X) to the SKIRT BRACE (II). Use four
BROWN 1" FLAT HEAD SCREWS (III).
å
Fasten the BOTTOM MOLDING (S) to the SKIRT BRACE (II).
Use four BROWN 1" FLAT HEAD SCREWS (III).
å
Fasten the PLINTHS (CC) to the SKIRT BRACE (II). Use four
BLACK 1-1/4" FLAT HEAD SCREWS (FFF).
Step 18
412079
www.sauder.com/services
Page 23
II
S
X
CC
CC
Curved edge
BLACK 1-1/4" FLAT HEAD SCREW
(4 used for the PLINTHS)
FFF
BROWN 1" FLAT HEAD SCREW
(8 used for the SKIRT and BOTTOM MOLDING)
III
