å
Unfold the BACKS (N and O) and lay them over your unit. The
notches in the DESK BACK (N) should fi t into the notches in the
HUTCH BACK (O).
å
Make equal margins along all four edges of the BACKS (N and O).
Push on opposite corners of your unit if needed to make it "square".
å
Fasten the BACKS (N and O) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over the
UPRIGHTS (E and G) and SHELVES (K and L).
å
NOTE: Perforations have been provided for access through the
BACK. Carefully cut out the holes needed. Carefully cut out the
rectangles in the BACKS for proper ventilation of your CPU.
Step 18
418650
www.sauder.com/services
Page 23
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi
nished
sur
face
These holes must line up
over the UPRIGHTS (E and G)
and SHELVES (K and L).
Notch
O
N
NAIL
(72 used in this step)
1N
