Step 8
401292
www.sauder.com/services
Page 13
å
Insert the DRAWER SIDES (D30 and D31) at an angle
into the slot at each end of the DRAWER FRONT (J2).
å
Slide the DRAWER BOTTOM (D982) into the
grooves in the DRAWER SIDES (D30 and D31)
and DRAWER FRONT (J2).
å
Fasten the DRAWER BRACE (M67) to the
DRAWER FRONT (J2). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D175) to the DRAWER
SIDES (D30 and D31) and DRAWER BRACE (M67).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
Repeat this step for the other DRAWER.
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
Surface with
HIDDEN CAM
1
2
3
4
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Groove
Arrow
Maximum
210 degrees
Minimum
190 degrees
J2
J2
J2
VIEW THE T-LOCK BOX VIDEO
D31
D30
D31
D982
D30
D30
M67
M67
D31
D175
Unfi
nished
sur
face
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
30S
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
