å
Carefully turn your unit over onto its front edges. Unfold the
BACKS (R and S) and lay them over your unit.
å
Make equal margins along all four edges of the BACKS (R
and S). Push on opposite corners of your unit if needed to
make it "square".
å
Fasten the BACKS (R and S) to your unit using the NAILS (RR).
å
NOTE: Be sure to tap NAILS into the holes that line up over
the UPRIGHTS (C and D).
å
NOTE: Perforations have been provided for access through the
LOWER BACK (S). Carefully cut out the rectangle for proper
ventilation of your CPU.
Step 8
404958
www.sauder.com/services
Page 13
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Unfi
nished
sur
face
These holes must line up over
the UPRIGHTS (C and D).
NAIL
(48 used in this step)
RR
Cut-out
S
R
Unfi
nished
sur
face
