Sauder Edge Water 419401 Скачать руководство пользователя страница 47

1. Sauder Woodworking Co. (Sauder®) provee cobertura de garantía limitada al 
comprador original de este producto por un período de cinco años, a partir de la fecha 
de compra, contra defectos en los materiales o de mano de obra en los componentes 
de muebles Sauder. Como es utilizado en esta Garantía, “defecto” signifi ca 
imperfecciones en los componentes que de manera fundamental afecta la utilidad del 
producto. Esta Garantía le permite a usted ciertos derechos legales, y usted también 
podría poseer otros derechos adicionales, los cuales varían de estado a estado.
2. No hay cobertura de garantía para defectos o estados que resulten del 
incumplimiento en seguir las instrucciones, la información o las advertencias sobre el 
ensamblaje del producto; del uso incorrecto o maltrato, del daño intencional, incendio, 
inundación, cambio o modifi cación del producto; o de la utilización del producto de 
manera contradictoria con el uso para el cual fue fabricado, ni por ningún estado que 
resulte del mantenimiento, limpieza o cuidado incorrecto o inadecuado. Tampoco no 
hay cobertura de garantía para los productos rentados o para cualesquiera productos 
comprados “de uso” o “como está”, en una venta de bienes embargados o en una 
venta por salirse del negocio, o comprados a un liquidador.
3. Como un recurso exclusivo bajo esta Garantía, Sauder (sólo a su opción) 
reparará o reemplazará cualquier componente defectuoso de mueble. Sauder 
puede requerir una confi rmación independiente de un defecto reclamado y una 
prueba de compra. Las piezas de repuesto serán garantizadas solamente por 
el período de tiempo que queda de la Garantía original. SAUDER NO TENDRÁ 
RESPONSABILIDAD por NINGÚN DAÑO INCIDENTAL O CONSECUENTE DE 
NINGÚN TIPO y todos dichos daños SE EXCLUYEN DE ESTA GARANTÍA, tales 
como pérdida de uso, desensamblaje, transportación, trabajo o daño a la propiedad 
en o cerca del producto. Algunos estados no permiten la exclusión o limitación de 
daños incidentales o consecuentes, en tales instancias la limitación o exclusión antes 
mencionada podría no ser aplicable a usted. 

4. Esta Garantía sólo es aplicable a defectos garantizados que primeramente surjan 
y se informen a Sauder dentro del período de cobertura de garantía. La Garantía 
no puede ser transferida a propietarios o usuarios subsiguientes del producto, y 
ésta  será inmediatamente invalidada en el caso que el producto sea revendido, 
transferido, arrendado o rentado a cualquier tercero u otra persona que no sea el 
comprador original.
5. NO HAY OTRA GARANTÍA APLICABLE A ESTE PRODUCTO. Bajo las leyes 
de ciertos estados, pueden no haber garantías implícitas de Sauder y se hace 
renuncia de responsabilidad de todas las garantías implícitas donde lo permita la 
ley, INCLUYENDO CUALQUIER GARANTÍA IMPLÍCITA DE MERCANTIBILIDAD O 
DE APTITUD PARA UN PROPÓSITO EN PARTICULAR. EN LA MEDIDA CUALQUIER 
GARANTÍA IMPLÍCITA ES APLICABLE, CUALESQUIERA GARANTÍAS IMPLÍCITAS, 
INCLUYENDO AQUELLA DE MERCANTIBILIDAD O DE APTITUD PARA UN 
PROPÓSITO EN PARTICULAR, SE LIMITAN EN DURACIÓN HASTA LA DURACIÓN 
DE ESTA GARANTÍA IMPLÍCITA o hasta el periodo mínimo permitido por la ley, 
la que sea más corta. Algunos estados no permiten limitaciones en cuanto a la 
duración de una garantía implícita, por eso la limitación arriba citada pueda no ser 
aplicable a usted.
6. Para solicitud de información o reclamación de Garantía, por favor, visite nuestro 
sitio Web www.sauder.com. Usted también puede contactar a Sauder llamando al 
1-800-523-3987. Sauder puede solicitar que las reclamaciones sean presentadas 
por escrito a Sauder Woodworking Co., 502 Middle Street, Archbold, OH 43502 
EE.UU. Por favor incluya su recibo de venta u otra prueba de compra y una 
descripción detallada del defecto del producto.

GARANTÍA LIMITADA DE 5 AÑOS

1. Sauder Woodworking Co. (Sauder®) off re une couverture de garantie limitée à l’acheteur 
initial du présent produit pendant une période de cinq ans à compter de la date d’achat 
contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder. 
Le mot « défaut », tel qu’il est utilisé sous les termes de la présente garantie, comprend 
les imperfections des pièces qui empêchent substantiellement l’utilisation du produit. La 
présente garantie vous donne des droits légaux spécifi ques et il est possible que vous 
ayez des droits supplémentaires variant d’État en État ou de province en province.
2. La présente garantie ne saurait couvrir les défauts ou conditions qui surviendraient à la 
suite du non respect des instructions, informations ou mises en garde de montage, d’une 
mauvaise utilisation ou d’un abus, d’un dommage intentionnel, d’un incendie, d’une inondation, 
d’une altération ou modifi cation du produit, d’une utilisation du produit allant à l’encontre de 
son usage prévu, ni aucune condition résultant d’une maintenance, d’un nettoyage ou d’un 
entretien inappropriés ou inadéquats. De plus, il n’existe aucune garantie pour les produits 
loués ou tous les produits achetés « d’occasion » ou « en l’état », dans le cadre d’une vente 
aux enchères ou de solde pour cessation de commerce, ou auprès d’un liquidateur.
3. En tant que recours exclusif en vertu de la présente garantie, Sauder réparera 
ou remplacera (sur sa seule décision) toute composante de mobilier défectueuse. 
Sauder peut exiger une confi rmation indépendante du défaut revendiqué ainsi 
qu’une preuve d’achat. Les pièces de rechange seront garanties uniquement pendant 
la période restante de la garantie originale. SAUDER NE SERA EN AUCUN CAS 
RESPONSABLE de TOUT DOMMAGE ACCESSOIRE OU CONSÉCUTIF DE TOUTE 
SORTE et lesdits dommages sont EXCLUS DE LA PRÉSENTE GARANTIE, à savoir 
perte d’utilisation, démontage, transport, main d’ceuvre ou dommages matériels sur 
ou à proximité du produit. Certains États ou provinces ne permettant pas l’exclusion 
ou la limite aux responsabilités pour dommages accidentels ou consécutifs, la limite 
ou l’exclusion ci-dessus peut ne pas être applicable.

4. La présente garantie ne s’applique qu’aux défauts garantis qui se produisent pour 
la première fois et qui sont signalés à Sauder dans les limites de ouverture de la 
garantie. La garantie ne peut pas être transférée à des propriétaires ou utilisateurs 
subséquents du produit, et sera immédiatement invalidée dans le cas où le produit 
est revendu, transféré, loué sous bail ou loué à une tierce partie ou personne autre 
que l’acheteur original.
5. IL N’EXISTE AUCUNE AUTRE GARANTIE EN VIGUEUR POUR LE PRÉSENT PRODUIT. 
En vertu des lois de certains États ou provinces, il ne peut y avoir de garanties implicites 
de la part de Sauder et toutes les garanties implicites, Y COMPRIS TOUTE GARANTIE 
IMPLICITE DE COMMERCIABILITÉ OU D’ADAPTATION À UN USAGE PARTICULIER 
sont déclinées partout où la loi l’autorise. DANS LA MESURE OÙ TOUTE GARANTIE 
IMPLICITE EST APPLICABLE, TOUTE GARANTIE IMPLICITE, Y COMPRIS TOUTE 
GARANTIE DE COMMERCIABILITÉ OU D’ADAPTATION À UN USAGE PARTICULIER, 
EST LIMITÉE À LA DURÉE DE LA PRÉSENTE GARANTIE EXPRESSE ou à la période 
minimum autorisée par la loi, la période la plus courte étant retenue. Certains États 
ne permettant pas que des limites soient imposées quant à la durée d’une garantie 
implicite, la limite ci-dessus peut donc ne pas être applicable.
6. Pour toute question concernant la garantie ou toute demande de réclamation, 
consulter le site Web www.sauder.com. Il est également possible de contacter Sauder 
en composant le 1-800-523-3987. Sauder peut exiger de soumettre les demandes 
de réclamation sous garantie par écrit à Sauder Woodworking Co., 502 Middle Street, 
Archbold, OH 43502 USA. Veuillez joindre votre ticket de caisse ou toute autre preuve 
d’achat ainsi qu’une description spécifi que du défaut de produit.

GARANTIE LIMITÉE DE 5 ANS

1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the 
original purchaser of this product for a period of fi ve years from the date of purchase 
against defects in materials or workmanship of Sauder furniture components. 
As used in this Warranty, “defect” means imperfections in components which 
substantially impair the utility of the product. This Warranty gives you specifi c legal 
rights, and you may also have other rights which vary from state to state.
2. There is no warranty coverage for defects or conditions that result from the failure 
to follow product assembly instructions, information or warnings, misuse or abuse, 
intentional damage, fi re, fl ood, alteration or modifi cation of the product, or use of the 
product in a manner inconsistent with its intended use, nor any condition resulting 
from incorrect or inadequate maintenance, cleaning, or care. There is also no 
warranty coverage for rented products or any products purchased “used” or “as is”, at 
a distress or going-out-of business sale, or from a liquidator.
3. As the exclusive remedy under this Warranty, Sauder will (at its sole option) repair 
or replace any defective furniture component. Sauder may require independent 
confi rmation of the claimed defect and proof of purchase. Replacement parts will be 
warranted for only the remaining period of the original Warranty. SAUDER SHALL 
HAVE NO LIABILITY for ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF 
ANY KIND and all such damages are EXCLUDED FROM THIS WARRANTY, such 
as loss of use, disassembly, transportation, labor or damage to property on or near 
the product. Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation or exclusion may not apply to you.

4. This Warranty applies only to warranted defects that fi rst arise and are reported to 
Sauder within the warranty coverage period. The Warranty cannot be transferred to 
subsequent owners or users of the product, and it shall be immediately void in the 
event the product is resold, transferred, leased or rented to any third party or person 
other than the original purchaser.
5. THERE ARE NO OTHER WARRANTIES APPLICABLE TO THIS PRODUCT. Under 
the laws of certain states, there may be no implied warranties from Sauder and all 
implied warranties, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE are disclaimed where allowed by law. 
TO THE EXTENT ANY IMPLIED WARRANTIES ARE APPLICABLE, ANY IMPLIED 
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE 
DURATION OF THIS EXPRESS WARRANTY or the minimum period allowed by law, 
whichever is shorter. Some states do not allow limitations on how long an implied 
Warranty lasts, so the above limitation may not apply to you.
6. For Warranty inquiries or claims, please visit our website www.sauder.com.
You can also contact Sauder at 1-800-523-3987. Sauder may require Warranty 
claims to be submitted in writing to Sauder Woodworking Co., 502 Middle Street, 
Archbold, OH 43502 USA. Please include your sales receipt or other proof of 
purchase and a specifi c description of the product defect.

5-YEAR LIMITED WARRANTY

419401

www.sauder.com/services

Page 47

Содержание Edge Water 419401

















































Отзывы: