Step 9
418529
www.sauder.com/services
Page 13
å
Insert two METAL PINS (1R) into the short edges of the
LOWER FRONT PANEL (F).
å
Fasten the PANELS (F and G) to the RIGHT END (E) and
UPRIGHT (C). Tighten fi ve HIDDEN CAMS.
å
NOTE: Be sure the METAL PIN inserts into the hole in the
RIGHT END (E).
å
Fasten the BOTTOM SUPPORT (B2) and UPRIGHT (C)
to the FRONT PANELS (F and G). Use two BLACK 9/16"
LARGE HEAD SCREWS (1S) through the METAL BRACKETS
on the BOTTOM SUPPORT and UPRIGHT and into the
FRONT PANELS.
Arrow
Minimum
190 degrees
Maximum
210 degrees
F
G
E
1R
C
Sur
face without HIDDEN CAMS
Sur
face without HIDDEN CAMS
Right End
1R
B2
BLACK 9/16" LARGE HEAD SCREW
(2 used in this step)
1S
