Sauder Carson Forge 416967 Скачать руководство пользователя страница 29

416967

www.sauder.com/services

Page 29

WARNING

Please use your furniture correctly and safely. Improper use can cause safety hazards,

or damage to your furniture or household items. 

Carefully read the following chart.

Look out for:

What can happen:

How to avoid the problem:

• Overloaded shelves.
• Improper loading can cause the
product to be top-heavy.

• Risk of injury.
• Top-heavy furniture can tip over.
• Overloaded shelves can break.

• Never exceed the weight limits shown in 
the instructions.
• Work from bottom to top when loading 
shelves. Place the heavier items on the 
lower shelves.

• Improperly moving furniture that is not 
designed and equipped with casters.

• Furniture can tip over or break if 
improperly moved.
• Physical injury. Furniture can be very 
heavy.

• Unload shelves from top to bottom before 
moving the furniture.
• Do not push furniture, especially on a 
carpeted fl oor. Have a friend help you lift 
the item and set it in place.
• This unit must be positioned against a 
wall.

• Children climbing on the shelves can 
cause the product to tip.

• Risk of injury or death.

• Do not allow children to climb on the 
shelves. Avoid placing items like toys or 
candy on upper shelves.
• Use the supplied safety bracket for added 
stability.

• Placing TVs on furniture items that are 
not designed to support a television is 
hazardous.

• Risk of injury or death. TVs can be very 
heavy. Plus the weight and location of the 
picture tube tends to make TVs unbalanced 
and prone to tipping forward.

• This product is not designed to support a 
television.

AVERTISSEMENT

Prière d’utiliser le mobilier à bon escient et avec prudence. Une mauvaise utilisation peut être à l’origine de risques

d’accident ou peut endommager le mobilier et les articles ménagers. 

Lire attentivement le tableau suivant.

À surveiller :

Danger éventuel :

Solution :

• Tablettes surchargées.
• En cas de chargement inadéquat 
l’élément peut être lourd du haut.

• Risque de blessure.
• Du mobilier mal équilibré risque de se 
renverser.
• Des tablettes surchargées risquerait
de casser.

• Ne jamais excéder les limites de poids 
indiquées dans les instructions.
• Pour charger les tablettes, commencer 
par remplir celui du bas pour fi nir par celui 
du haut. Placer les articules plus lourds sur 
les tablettes inférieures.

• Déplacement inadéquat d’un mobilier qui 
n’est pas conçu pour avoir des roulettes et 
n’en est pas équipé.

• Le mobilier risque de se renverser ou de 
casser en cas de déplacement inadéquat.
• Blessure physique. Le mobilier peut être 
très lourd.

• Décharger les tablettes en commençant 
par celui du haut avant de déplacer le 
mobilier.
• Ne pas pousser le mobilier, surtout sur 
la moquette. Se faire aider par une autre 
personne pour soulever l’élément et le 
mettre en place.
• Cette unité doit être placée contre un mur.

• Les enfants qui grimpent sur les tablettes 
risquerait de déséquilibrer ce dernier et de 
le faire tomber.

• Risque de blessures graves, voire 
mortelles.

• Ne pas laisser les enfants grimper sur 
les tablettes. Ne pas placer de jouets ou 
d’aliments sur les tablettes supérieures.
• Utiliser la console de sécurité fournie pour 
plus de stabilité.

• Il est dangereux de placer des téléviseurs 
sur des meubles que ne sont pas prévus à 
cet eff et.

• Risque de blessures graves, voire 
mortelles. Les téléviseurs peuvent être 
particulièrement lourds. De plus, le poids et 
l’emplacement du tube image ont tendance 
à rendre les téléviseurs instables et enclins 
à tomber vers l’avant.

• Ce produit n’est pas destiné à supporter 
un téléviseur.

Содержание Carson Forge 416967

































Отзывы: