Fasten an END MOLDING (T) to the RIGHT END (A). Tighten two HIDDEN CAMS.
Fasten the other END MOLDING (T) to the LEFT END (B). Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten two CORNER BRACKETS (31G) to the BASES (P and Q) and BOTTOM (F). Use eight BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten two METAL BRACKETS (4G) to the BOTTOM (F). Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE
:
Be sure the BRACKETS are even with the edges of the BOTTOM.
Fasten the BASE (O) to the CORNER BRACKETS (31G) and METAL BRACKETS (4G). Use six BLACK 9/16" LARGE HEAD
SCREWS (1S).
12
12
S
te
p
Page 16
www.sauder.com/services
414723
31G
31G
O
F
P
Q
BLACK 9/16" LARGE HEAD SCREW
(18 used in this step)
1S
4G
A
T
T
B
Maximum
210 degrees
Minimum
190 degrees
Arrow
Use the small holes in
this MOLDING (T).
These edges
should be even.
These edges
should be even.
