Fasten four LARGE METAL BRACKETS (19G) to the ENDS (A and B) and two METAL BRACKETS (4G) to the BOTTOM (D).
Use six BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the SKIRTS (I) to the ENDS (A and B) and BOTTOM (D). Use six BLACK 9/16" LARGE HEAD SCREWS (1S) through the
METAL BRACKETS and into the SKIRTS.
NOTE: There are no pre-drilled holes in the SKIRTS. The SCREWS will tighten into the groove.
10
10
S
te
p
Page 14
www.sauder.com/services
414686
D
A
B
I
I
Use this
groove.
BLACK 9/16" LARGE HEAD SCREW
(12 used for the METAL BRACKETS)
1S
4G
4G
19G
19G
(2 used)
(4 used)
19G
19G
Use the
center hole.
Use the
center hole.
