Insert the DRAWER SIDES (D16 and D17) at an angle into the slot at each end of the DRAWER FRONT (H).
Slide the DRAWER BOTTOM (D720) into the grooves in the DRAWER SIDES (D16 and D17) and DRAWER FRONT (H).
Fasten the DRAWER BACK (D73) to the DRAWER SIDES (D16 and D17). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
8
8
S
te
p
Groove
The tabs should insert freely into the slots.
Gently tilt the DRAWER SIDES side to
side until the tabs slip into the slots.
UNFINISHED
VIEW THE T-LOCK BOX VIDEO
1
st
2
nd
3
rd
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
With the palm of your hand, tap the
DRAWER BOTTOM down into the groove.
D16
D16
D16
D17
D17
D17
D73
D720
H
H
Page 12
www.sauder.com/services
414259
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
30S
